Vietnam Jungle Hammock

Posted on Leave a comment
vietnam jungle hammock slp83 3 e1517857883327

Sleeping in a hammock

When you are outdoors.

It’s hot, wet, and infested with mosquitoes, bugs and snakes; and the last place you want to lay-in for the night is on the jungle floor. A hammock is the best way to sleep out in the wild , since it offers you an escape from the ravages of extreme environments. We know that when you think hammock, a net material comes first to mind. The ventilation provided by a netting is perfectly optimal on the beach or out in the backyard on a lazy Sunday afternoon. But if you are on top of a 1 inch square mesh fabric, there is no protection offered against mosquitoes and biting flies. So the military developed the solid nylon material  to sleep on. The nylon itself  is heavy-gauge weave like the latest issue nylon cot covers are today. The jungle hammock  is simple in design.  A sleeve, sewn on each of the ends, allows for a braided nylon support rope to slip through each end allowing a  simple bowline knot on the outside and the 10ft of nylon rope  to hang this hammock between two structures (most likely trees). However, many an enterprising sleeper, has tied-off one end of the hammock to a vehicle, large tent, building or unique rock structure.

The hammock is multi-faceted and the first component is strength. The next is  to shield against the elements such as  protect against the rain, which in the jungles of Vietnam, can be torrential at times and linger-on for days. U.S. military engineers devised a way that allowed  a rope down the length of the hammock, stretched between the two lines holding up the hammock.  A special guy-line attachment on the support ropes allows for the roof support for the military issue poncho. Yes, the poncho that every fighter in Vietnam carried and wore, would make for the perfect roof on top of the jungle hammock. In addition, if the mosquitoes were especially bad, one could lay a mosquito net under the poncho as well.

While these original issue Vietnam hammocks are hot on the collectible and display market, they are great for your next camping trip as well. The solid material design becoming the norm in high-end camping hammocks. They are simple and very comfortable. Mesh net fabric has its drawbacks, not the least of which, you can get yourself pretty darn tangled up in those things.

Desert Shemaghs

Posted on Leave a comment

The shemagh is a traditional middle eastern headwear scarf that is usually made from cotton. However, wool blends are very popular as well. Most of the shemaghs purchased at army navy stores, like Omahas Surplus, are made of cotton and come in a variety of colors. You can buy these scarves here at Omahas and they usually feature 2 colors that can serve to have meaning as well as provide a certain amount of  camouflage.

shemagh showcase

The shemagh has also become quite the fashion accessory, especially among hipsters and college students. While some may also see it as popular headdress among terrorists, our soldiers have adopted them since Vietnam because of the practicality in the field of battle. The loose woven cotton provides superb airflow and ventilation while at the same time keeping out the sand and uv rays from the sun.

The vibrant color schemes and designs that are woven into the shemagh scarves are often associated with different tribal origins from the middle east. For example, red/white pattern is most often associated with Jordanians. Solid white is traditionally Saudi. 

M-1 Helmets

Posted on Leave a comment

The military M-1 helmet was designed by the United States during World War 2 and was used until 1985. Its design is so simple and effective that many other countries adapted at least some form of the m-1.  The iconic 2 pc helmet system features an outer steel shell and an inner safety type hard hat that carries a suspension system to allow the wearer to fit the helmet according to the size.

p 30565 hed2703 post ww2 steel pot helmet leather chinstrap  1  scaled

The steel pot was made from hardened manganese steel with a crimped outer rim made of stainless steel to give the helmet a smooth edge. In early ww2 the crimped steel ring met at the front of the helmet (called front weld) . By 1943 the weld was moved to the back. The steel pot holds a chinstrap via 2 metal rings or bails that was rarely worn around the chin as soldiers were afraid that the enemy could grab them from behind and use the strap to choke and pull them down. The “nape” strap that runs along the back of the neck was usually sufficient to hold the helmet securely to the head.

Early steel pots had fixed metal receivers or “bails” to hold the sewn cotton chinstrap. Because the fixed bails were prone to snapping off when the helmet was dropped or sat on, the bails were eventually made to swivel. Later chinstraps were nylon and easily clipped onto the helmet bails. Steel pots tend to last forever and are still relatively easy to find at just about any army navy store. It is the more fragile fiber liners that are the more difficult part of the m-1 helmet to locate.

p 28492 hed1444 Wwii Helmet Liner 2C Rough No Sweatband lg 2
Ww2 Helmet Liners

At Omahas, we have not been able to sell many of the liners separately for quite some time as we have many more steel pots than liners and need them in order to sell complete sets.

The fiber liners have come in many different materials over the years and some even have paratrooper chinstraps on them for special model helmets. We have a good supply of the 1980’s paratrooper style helmet liners and it is the only m-1 liner we have available for sale separately.

p 26995 hed523 m 1 helmet liner paratrooper 1 e1516457034574 scaled
1980’s Paratroop Liners

Ammo Boxes

Posted on Leave a comment

An army surplus store staple, the revered ammo can is one of those genuine military issue items that can be indispensable in helping to store valuables as well as ammunition. Omaha’s Surplus stocks these in the thousands at all times due to such a high demand. While many ammo boxes from the military are made from wood, the most reused for ammo are the metal variety.

50 cal ammo cans stacked on pallets
50 cal ammo cans

The metal cans have rubber gaskets on the lids, and clamp-down super tight through the use of a camover latch that helps seal the gasket to the rim of the opening. Also on most types of ammo cans the lid can be removed by sliding it apart at the hinges. This removal comes in handy if you don’t want the lid in the way.

They are good for all kinds of ammunition storage as well as just handy to have around the garage to help organize and store safely tools, car parts, chemicals, bolts and nuts, batteries, gun parts, and the list goes on.

it is interesting that the military, for the most part, uses the cans for storage and transport. The makers of the ammunitions use them to ship and once they are opened and emptied, they are sent off for salvage to be bought and recycled by a variety of end users and resellers.

The cans come in many different sizes, but the most common and popular types seen in army navy surplus stores are the 50 caliber can, which actually is used for many different types of ordnance besides the 50 caliber machine gun rounds.

Vietnam Jungle Boots

Posted on Leave a comment
vietnam jungle boots 3rd pattern with vibram sole 11N bts3029 1

The use of jungle boots in the military predates World War 2 where small units in Panama were given these to experiment with a boot that would protect their soldiers from the harmful effects of wet feet. The concept was not to keep the water out of the boot. That was impossible without wearing rubber. Rubber boots in a hot humid environment would not have been a good solution. The lightweight canvas upper and leather lower design that the military came up with included water drain holes in the instep to let water flow through. Along with a Saran mesh insole, the idea was to keep the wearer’s foot up off of the sole so that air could be exchanged with water through the drain holes. The drain holes featured a screen in order to keep the bugs out. Also, there was a stainless-steel plate inside the sole to keep out the “punji” stakes that were hidden in booby traps by the “VC”

By the time we were involved in Vietnam, several modifications and improvements were made to the boots. Most noticeably was the introduction of the “Panama” sole. This sole was designed to throw-off mud quicker. The jungle boot continued to be used throughout the 1970’s and 80’s. Some Marines even used the boot into the 1990’s. The green jungle boots were used in Desert Storm as well until the Type 1 Desert boot came along.

p 26153 bts30 jungle boots case scaled

P-38 Can Opener

Posted on Leave a comment

Many say the P38 can opener was named after the P-38 lighting fighter plane because you can get into a can of rations so fast. Others point to the fact that after you open a can of k-rations or c-rations with one of these little busters, you can count 38 puncture marks around the outside of the lid. However, the can opener also has a big brother called the p-51, but it leaves less puncture marks because of the size.  Still another theory is that they are named after their measurement in millimeters.

p38 can opener original issue otg316 (1)
Original P-38 in paper wrapper for rations

They sit right there in front of any cash register, in any army navy store, across the US. An army surplus staple, every other customer either has a question about, or wants to tell you about, the p-38 can opener. Whether you call them a “John Wayne” like the US Marine Corps, or just a can opener, they are an absolute essential impulse item for those that have never seen them or those that already have one, or two, or ten.

At 98 cents apiece, you can’t go wrong. They do not take up any room in your gear bag or your pocket. Lightweight, strong and long lasting, they never run out of batteries. They never dull and you can open a can quicker with one of these than any other manual can opener on the market. There is a hole on one end so you can put one on your keychain and never be without a way into vintage can of k-rations, or Beenie weenies.

Omaha’s has them available in all original issue or current production. We still have some of the issues in original brown paper wrapping with instructions. Most of the ones you see now are manufactured by “Shelby’, but there were others who made them as well.

Why are they called a “John Wayne”? Good question.

They were actually developed back in World War 2, but back in the 60’s, the Duke did some training films for our boys in the military. One of those films just happened to be all about the can opener the military developed as a way for our boys to get into the cans of c-rations without having to carry a large scissor-type of kitchen utensil in their backpack. Cause let’s face it, who wants to carry large kitchenware around when you’re fighting the bad guys.

p 29145 msc1909 P 38 Can Opener 2C 4 Pk lg 2
P 38 Can Opener

WW2 Army Leggings

Posted on Leave a comment

We happened across an incredibly large stockpile of the cotton canvas khaki leggings many years ago and bought them all.

p 26247 bts96 ww2 leggings size 3  2  scaled
WW2 leggings size 3

Sizes available are 1 or 3. We at first thought that 3 was rather small and size 1 even smaller. However, that was before we realized that you do not wear them over an existing boot. Rather they become a way of turning a high-top leather shoe into a make-shift boot.

Made of durable canvas, the leg protectors offer guard against bugs, plants, rough terrain, snakes, and other annoying critters that can leave a soldier stranded with a foot or leg injury.

ww2 leggings size 3 bts96

Dawning the leggings can seem quite daunting if you haven’t seen the procedure before. First, you lace the string back and through all the holes on one side of the spat. Tying the top and bottom off and leaving enough slack to pull each spaced string across the opposite hook on the other side of the leggings. In this way you can take them off and put them back on easily without having to pull the strings out of the holes like you would with a traditional shoe or boot.

For the WW1 or WW2 reenactor the legging is one of the iconic clues to the time period of an army ground troops uniform and is recognized the world over as classic to the look of a doughboy or WW2 soldier.

Mk15 Mod 4 Practice Bomb

Posted on Leave a comment

Our Father bought these mk15 mod 4 100lb. practice bombs way back in 1982.

The blue metal bombs were new in the original packing crates of 20 each and probably one of the best finds “the Old Man” ever bought.  Our dad recognized that these were not something you could just call up and get anytime you wanted them, so he bought them all. Today we still have quite a few remaining, and it is one of our most popular items for sale on the website.

The bombs are completely inert, as they were only used for training purposes. Pilots will drop this type of training device to practice getting the bombs to their desired target. The hollow, steel structures were filled with water and sand to a weight of 100 pounds. Note: they only weigh about 20 pounds empty so don’t worry about the UPS driver throwing out his back getting them to your door:-)

We ship them in custom heavy duty stapled cardboard boxes made right down the street at Ward Packaging company. The box and packaging material alone cost us about $18.00, but it is well worth it to protect the fins and insure their safe arrival to you.

We have sold these eye popping attention getters  for just about anything you can imagine: movie props, man-cave decor, signs, donation and ticket-taking vessels, bar lights, door stops, trench art, etc.

Several of our cutomers have devised a way to cut them in half length wise and make pool table light fixtures.

If you have bought one of these from us, leave a comment and let us know how you used them!


Omaha’s Surplus over 50 Years in Business

Posted on Leave a comment

Omaha’s Surplus was founded in 1963 in Fort Worth, Texas by “the old man,” whose family had been in the government surplus business since 1945, selling various tools and military industrial surplus. After WW2 the boom of army navy stores began.

While the US government had been disposing of military surplus since and around the Civil War, it wasn’t until the end of World War 2 that the amount of their surplus was so great that it actually created an industry. There was so much Wart Surplus available that it seemed every type of store was in on the distribution of army navy goods. One could find army navy surplus at store like Sears, Montgomery Ward, and JC Penney.

The old man’s Parents(our grandparents) specialized in buying and selling  US government surplus tools and industrial equipment. Before the days of Home Depot, Lowes, and Northern Tool, inexpensive, quality tools were hard to find. Our grandparents would go to auctions at major defense contractors around the country to pick up great deals on big lots of surplus tools and supplies. Initially selling out of the back of a truck, they eventually expanded to a brick and mortar retail store called Williams Tools.

In 1963 our father set out to open his own version of the surplus store offering not only tools and supples but mixing in some military surplus clothing , ammo boxes, field equipment and camouflage uniforms that he would run into at various auctions he would attend.  He came up with the name Omahas Surplus to set himself apart from the other store. He said it just sounded good to him, something different.

By 1983, Omaha’s transformed itself in 1983 to a true Army Navy Surplus Store with an expansion into a new building, offering authentic products such as clothing, military outdoor field gear and adventure equipment with an incredible selection of hard to find genuine surplus items. In 1987 the old man’s sons jumped on board to help expand the business.

In 1999, the Omaha’s Surplus e-commerce retail store was born, with the ability to offer more original army navy surplus products to people all over the world. The store in Fort Worth flourished, providing quality military goods at affordable prices to military personnel from Carswell AFB and Fort Hood even. All types of customers began to look to Omahas for camping and hunting gear that you could not find in any of the big box stores. Military surplus quality camouflauge and out door equipment is super durable and inexpensive.

In 2013, to celebrate the 50th Anniversary of Omaha’s Surplus, a new logo and website was created providing a fresh look to the historic branding our our long-time Fort Worth institution called Omaha’s Suplus. Still family owned and operated, further expansion and an internal relocation has been necessary due to the initiation of the TRWD’s  Trinity River Vision project. We now have a new “backdoor entrance” at 2412 Whitmore where the visiting public can experience the working warehouse as we transition the White Settlement store onto Whitmore.

For those who don’t know the Trinity River Vision Project is a $1 Billion dollar flood control and economic development coming from the heart of downtown to help control flooding and revitalize the near west side of downtown fort worth.

When visiting fort worth, it is a little tricky getting to our location now as White Settlement Road has been closed from Henderson until Mid 2018. Best to approach from the west off of Universtiy or 7th streets.

Omaha’s has accumulated a tremendous inventory of authentic military surplus. Military, Hunters, Campers, Reenactors, Theatre, Costumers, Veterans, First Responders, and more look to Omaha’s Surplus to fulfill their Army Navy surplus needs.   

vintage surplus 1950 williams tools
Williams Tools 1950’s
Omahas Store 1983 1999 1

Omaha’s 1983 & 1999

50th ann omahas
50th Anniversary Omaha’s
omahas crew tank photo
Omaha’s Team
68352692 2776502919027173 8698833208617205760 n
Omaha’s Team